21/06/2018
The Uwell Nunchaku Starter Kit, is an intelligent v**e pen. Despite the fact this is Uwell’s first entry into the v**e device market, it is a refined piece of hardware that is easy to use. It has an 80w output, powered by a single 18650 v**e battery (sold separately) and includes the Nunchaku tank.
The Nunchaku has a clean and simple aesthetic, but don’t let that fool you; it still gives the user access to a host of functions typically seen only in box mods. Including VW (Variable Wattage) Mode, TC (Temperature Control) Mode, and the ever popular Bypass Mode - which allows the device to act like a mechanical mod by drawing power directly from the battery. All modes can be viewed and change via the compact display screen, located at the bottom of the device.
Safety as ever is a paramount concern for Uwell, and the Nunchaku includes low voltage protection, short circuit protection, low resistance protection, and an 8 second cutoff. All ensuring a safer and better v**e experience. When it comes to charging the 18650 battery, it can either be easily removed from the Nunchaku and charged externally; or it can be charged internally via USB.
The Nunchaku sub ohm tank has a 2ml fill capacity and has the option of using either 0.2 Ohm or 0.4 Ohm coils. This is coupled with Uwell’s innovative Pro-FOCS (Professional Flavor Optimizing Core System) which increases the quality of flavour.
Coil change and general maintenance have been made even easier, as the Nunchaku has a plug and pull coil design - for a quick and clean coil change. When it comes time to clean the tank, you’ll appreciate the new condensation holder, which while reducing spit back and leaking also allows for a quicker clean up.
Overall, while the Nunchaku is a v**e starter kit aimed at new users, it should also be considered for use by experienced v**ers due to it’s features and design.
Contains:
1× Nunchaku Mod
1× Nunchaku Tank
1x Spares Kit
1× 0.25 Ohm Coil (pre-installed)
1× 0.4 Ohm Coil
1× USB Charging Cable
1× User Manual
Features:
80W Output
Requires Single 18650 Battery
Variable Wattage Mode
Temperature Control Mode
Bypass Mode
2ml Tank Capacity
Plug and Pull Coils
Important Information about Sub Ohm Va**ng:
This device is designed for sub-ohm va**ng. It requires more va**ng experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.
We also advise not to use any e-liquid with more than 6mg of ni****ne, as your vapour may taste harsh. Sub ohm va**ng produces a bigger throat hit than standard coils, and extra care should be taken.