04/05/2024
AQUAPRO Pool Muriatic Acid - PH down 3.7 Liter
AQUAPRO Pool Muriatic Acid balances your pool chemistry by lowering total alkalinity and pH of your pool water. It typically has a lower concentration of hydrogen chloride than the muriatic acid youโll find at hardware stores for use in industrial applications like masonry.
โ How to use:
If you have a pH reading of 7.8 or higher, and an average size (15,000 gallons) in-ground pool, you should add 1/4 gallon (a quart) of muriatic acid, and re-test after the water has circulated for an hour. If you have a smaller pool, or an above-ground pool, you would start with one cup of acid, and then re-test and add more if needed. If you have a spa, we are talking only capfuls at a time. Very little acid is needed to adjust pH in a spa.
โ How to use AQUAPRO Pool Muriatic Acid
When you add acid, pour it into the deepest part of the pool, while the pump is running and circulating the water. Wait at least an hour before using the pool; if you added a lot of acid, wait 24 hours and test the pH before using the pool.
โ SAFETY INFORMATION
AQUAPRO is dedicated to the safe use of all of its products. While all accidents cannot be prevented, practicing good safety habits, setting and following rules, carefully reading instruction manuals, and vigilant supervision can greatly reduce the likelihood of injury.
Essential Safety Measures with Muriatic Acid. Wear full-face protection, a respirator, thick, full-coverage clothing, and acid-resistant protective gloves. Muriatic acid must be diluted in water.
Please click here to order: https://invl.io/cll2s4l